SS Deep Drawing Bending 0.01mm Stamped Aluminum Sheet

Aluminium Stainless Steel Deep Drawing Bending Cheap Aluminum Stamping Parts

Metal Stamping Parts

Xincheng Stamping manufacturers steels parts to meet the needs of your specific applications. Whether you need is a large, heavy part that requires thick walls for support, a small, intricate part, or a part that requires hardening and finishing after stamping, Xincheng Stamping has the capabilities to assist you.

We offer customer stamping, progressive stamping, and prototype stampings to ensure you receive the stamping product that best first your industry needs.

Operation

• Bending - the material is deformed or bent along a straight line.
• Flanging - the material is bent along a curved line.
• Embossing - the material is stretched into a shallow depression. Used primarily for adding decorative patterns. See also Repoussé and chasing.
• Blanking - a piece is cut out of a sheet of the material, usually to make a blank for further processing.
• Coining - a pattern is compressed or squeezed into the material. Traditionally used to make coins.
• Drawing - the surface area of a blank is stretched into an alternate shape via controlled material flow. See also deep drawing.
• Stretching - the surface area of a blank is increased by tension, with no inward movement of the blank edge. Often used to make smooth auto body parts.
• Ironing - the material is squeezed and reduced in thickness along a vertical wall. Used for beverage cans and ammunition cartridge cases.
• Reducing/Necking - used to gradually reduce the diameter of the open end of a vessel or tube.
• Curling - deforming material into a tubular profile. Door hinges are a common example.
• Hemming - folding an edge over onto itself to add thickness. The edges of automobile doors are usually hemmed.

Our servies


Factory Equipment